Magic of Christmas Potion Ornament

     Every holiday needs a little magic.  This ornament is a great gift for magic lovers of all ages.  Customize with your preferred glitter color(s) and your favorite holiday spangles/confetti.  You could also make "Magic of Christmas" potion pendants using this tutorial.

Materials:
*Corked vial
*Glitter/spangles/confetti of your choosing
*All purpose adhesive
*Twine
*Printer paper
*Coffee
*Baking pan
*Black gel pen
*Scissors

Directions:
*Uncork the vial and pour in a layer of glitter in a color of your choosing.
*Add a layer of spangles.
*Either cork the vial or cover the opening with your finger and shake until the glitter and spangles have mixed together.
*Add a layer of glitter followed by a layer of spangles and then shake until mixed.
*Repeat the process until your vial is sufficiently full.
*Cork the vial.  You may want to use a dab of all purpose adhesive to secure the cork in place so it won't fall out.
*Wrap some twine around the neck of the neck of the vial and knot.
*Pull the twine 1/4 of the way back around the neck of the bottle on either side and glue down.  Once your are finished, the vial should hang straight down rather than at an angle as it would if hanging from the knot.
*Tie the ends of the twine together to create a loop.
*To make the label, follow the directions given in this post.
*Glue the label on.  Once everything is dry, your ornament is tree-ready!

Maine is Where the Heart is Felt Ornament

     Show some love for the greatest state this holiday season.  While my template is for Maine, you could easily design a template of your own and follow the same steps to create an ornament for your home state.

Materials:
*Felt in a color of your choice
*Metallic marker
*Heart button
*All purpose adhesive (optional)
*Needle and thread
*Stuffing
*Metallic thread

Directions:
*Print out the Maine template below or find/create a template for your state.  The dot on my template marks the approximate location of the Bangor area, which is where my family is from and thus where I wanted the heart on my ornament to be.

*Trace two copies of the state template onto the felt using metallic marker and cut out.

*I used a little bit of all purpose adhesive to hold my heart button in place before sewing it on.  The drawback to this approach is that I had to sew through the glue, but it wasn't much of a challenge and ensured that I got the heart in the right location.

*Stitch together the two copies of the state using a blanket stitch, leaving a gap for stuffing.

*Stuff and sew closed.

*Slide some metallic thread through the stitching toward the top and tie the ends together to create a loop to use to hang the ornament from the tree.

Pokeball Glitter Ornament

     Show off your love for Pokemon and add some sparkle to your holiday season with these fun Pokeball glitter ornaments.

Materials:
*Red ultra fine glitter
*White ultra fine glitter
*Glitter-It glue
*Plastic or glass ball ornament
*Black duct tape
*White duct tape
*Scissors

Directions:
*Layer your work space with newspaper.
*Uncap your ornament and pour in some Glitter It.  Swirl the adhesive around until it has coated the entirety of the inside of the ornament.
*Pour excess adhesive back into the bottle.  Let the adhesive drain out for about 15 seconds.
*Pour a small amount of white glitter into the ornament, being careful so as to keep it from hitting the sides.  Slowly swirl the glitter around the bottom of the ornament until it all sticks to the bottom of the ornament.
*Add a little more glitter and swirl it around, slowly working your way up until the bottom half of the ornament is covered in white glitter.
*Add in some red glitter and swirl it around the top of the ornament, until the top half of the ornament is covered in red glitter.  Inevitably, some of the red glitter will mix with the white at the bottom and vice versa, but it should only be a minimal amount.
*Cut off a strip of black duct tape slightly longer than the circumference of your ornament and from that cut a strip about 1/2" in width.  Tape this around the equator of your ornament.
*Cut out a circle of black duct tape and tape that over the strip of duct tape running along the equator.
*Cut out a white circle of duct tape which is smaller than the black one and tape that over the black circle.

Felt Gingerbread Zombie

     Looking for something cuddly and sweet to give your valentine?  Search no further than this craft ;).

Materials:
*Brown felt (for a more gingerbready aesthetic) or green felt (for a more zombie-like look)
*Gingerbread person template (I traced around a cookie cutter)
*Chalk
*Scissors
*Red and white (or black) fabric paint
*Needle and thread
*Stuffing

Directions:
*Trace two gingerbread person shapes onto your felt with chalk and cut out.
*Decorate one of your gingerbread cut outs with fabric paint to make it look zombie-like.  A few years ago, Brian and I made gingerbread zombie cookies for a Halloween party and I decided that I wanted to make mine resemble that, but you can also go for a more gruesome look.  Set aside your zombie to dry.

     The zombie gingerbread person that served as the inspiration for my zombie gingerbread plushie.

*Using a blanket stitch, sew the together the two zombie halves, leaving an opening large enough for you to add the stuffing.  Insert stuffing until your zombie reaches its desired fullness and then sew closed.

Paper Snowflake Ornaments

Materials:
*Paper snowflakes cut from either plain printer paper or from sales flyers.
*Cardstock that matches your snowflake
*Pencil
*Drinking glass
*Scissors
*All purpose adhesive
*Ribbon

Directions:
Note: for a video tutorial of how to make a six-pointed paper snowflake, see my Six Pointed Paper Snowflake tutorial.  For a pictorial tutorial, see the beginning of my Sales Flyer Snowflake Bows tutorial.
*Create paper snowflakes by tracing around the rim of the drinking glass onto the paper that you would like to make your snowflake and then fold up and cut out either using your own method or by following one of the above tutorials.
*Trace the rim of the drinking glass onto the cardstock and then cut out the resulting circle.
*Glue the snowflake to the cardstock.
*Cut off some ribbon or thread and form a loop.  Glue the loop to the back of the ornament.

Photo Ornament Holiday Card

     I love the idea of ornament cards.  Ordinary cards are nice, but it can be hard to figure out what to do with them once the holiday season is over (if you're looking for some ideas, see these three posts).  With ornament cards, you can place them on your tree and they're small enough that they take up little storage space.  However, they tend to be expensive if you buy them from a photo printing store.  Luckily for me, I figured out a way to make them inexpensively at home.

Shameless Promotion of Brian's Work Interlude

     Before I get into the heart of today's blog post, I want to take a minute to shamelessly promote my partner in crime, Brian's new coloring book because it is awesome.  It's called Maineiac Coloring (if you're unfamiliar with the term, Maineiac is another nickname for someone from the state of Maine) and it features 30 pages of his hand drawn, whimsical illustrations for you to color.  You can find a preview of it here, and if you like his work, please consider buying a copy.  If you have a colorer on your holiday shopping list, it would make for a fantastic gift and you can feel good knowing your money is going to help a couple of grad students pay for their school/living expenses.
     Now, without further ado, we return to your regularly scheduled crafting.

Photo Ornament Card

Materials:
*Patterned cardstock
*Digital photo and photo editing program
*Scissors
*All purpose adhesive
*Acid free pen
*Hole punch
*Ribbon

Directions:
*In a photo editing program (I used Jasc Paint Shop Pro), open a copy (not the original) of the photo you would like to use for your card.
*Using a white circle, frame the photo.
*Draw a white line across the bottom of the encircled part of the photo about 3/4 of the way down.
*Erase everything below the white line.
*Draw a black circle encompassing the white circle.
*Erase everything outside the black circle.  It may help to draw a second white circle and place that around the black circle and then erase so that you don't have to come close to the black circle with your erasing.
*Once it's all finished, you should end up with something like this:

*Print out your photo at the desired size.  Mine was about 2.75" at its widest point.
*Write your holiday message at the bottom of the photo (alternatively, you could add text using your photo editing program).
*Print out the below snowflake at your desired size (mine measured about 3.5" across) and trace onto patterned paper.

*Punch a hole through the top of one of the arms of the snowflake and thread the ribbon through, knotting the two ends of the ribbon together to form a loop.
*Glue your photo onto the center of the snowflake.

"Owl I Want for Christmas is You" Printable Ornament

Materials
*"Owl I Want for Christmas" printable (see below)
*Colored pencils
*Patterned paper
*Scissors
*Metallic thread
*Pencil
*All purpose adhesive

Directions:
*Print out a copy of the "Owl I Want for Christmas" printable.

*Color in the two circular owl panels and then cut out the shapes.

*Trace the flower-type shape onto the patterned paper, flipping over the template between traces and making sure to otherwise keep the same orientation of the template.  The scallops are not all even, so lining the two shapes up to fit can be difficult if not planned out carefully in advance.

*Cut out the flower shapes.

*Cut off a length of metallic thread and fold it in half.  Glue the ends to the back side of one of the flower shapes.

*Glue the second flower back to back with the first, making sure the two shapes fit together correctly before gluing.

*Glue the circular owl panels to either side of the flower shape.

Sales Flyer Snowflake Bows

'Tis the season for sales.  No doubt you've been inundated with countless flyers informing you of all the deals that are going on.  Instead of tossing them, use these brightly colored advertisements to make bows for your holiday gifts.  I got the idea for this craft from this site.

Materials:
*Sales flyers, magazine ads, or other brightly colored paper scraps
*Pen
*Drinking glass
*Scissors
*Brad
*Washer
*All purpose adhesive

Directions:
Note: for a video tutorial of how to make a six-pointed paper snowflake, see my Six Pointed Paper Snowflake tutorial.
*To create a six-pointed paper snowflake, choose a portion of the advertisement that you would like to use for your snowflake.  Place the glass over this space and trace around it to get a circle.

*Cut out the circle.

*Fold the circle in half.

*Fold over about 1/3 of the half circle, such that the resulting shape looks like two triangles of equal size.

*Fold the resulting shape in half to get this shape:

*Cut out triangles, semicircles, squiggly lines, etc from the folded shape.  Do not cut out the center.

*Unfold and you now have a paper snowflake.

*Repeat the above steps to create a second paper snowflake.

*Glue a washer to the center of one of the snowflakes and slide a brad through the center of the other.

*Slide the brad through the center of the second snowflake.

*Pull the two snowflakes together and fold over the prongs on the brad.  Now you have a colorful snowflake gift bow.

Christmas Memory Box

      Hope you all have been enjoying your holidays.  Here's a neat way to preserve your holiday memories.  I bought an unfinished cigar box from Joann and painted and then stuck in some little mementos of Christmas, such as gift tags, paper snowflakes, and some bubbles I got from my family's annual "yucky" swap.  It's hard to tell from the photo, but I have a couple of pieces of cardboard behind each of the three framed pictures inside the box to make them "pop out."  Also, the little "present" opens up into an accordion style photo album.  Check out the video below for more details and check below for a few more pics :).

     This is what the outside of the box looks like,

     Here's what it looks like with the photo album pulled out and the little book moved aside.  You can see that I have a little photo of my tree that hides behind where the book goes.

Finals Week Polly Pocket Ornament

     Finals week.  For the past seven years it has been just as much a part of my holiday season as decorating the tree.  In fact, I took my grad physics exam this afternoon, so it's just now finally over.  When I was a kid, I always wanted a Polly Pocket ornament and this ornament gave me the chance to combine that desire with my background in mathematics and physics (notice that Polly's textbooks are on nuclear physics and differential geometry).

Polly's "House"

Materials:

*Wide jewelry box

*Scrapbooking paper

*Felt

*Pencil

*Marker

*Scissors

*Needle

*Thread

*All purpose adhesive

Directions:

*Trace the back, two short sides, and one of the long sides of the jewelry box onto the piece of patterned paper.  Trim as necessary to get them to fit inside the box and then glue into place.

*Trace the lid of the box onto the sheet of felt and cut out.

*Glue one of the long sides of the box inside the lid as pictured.  Set aside to dry.

*Once dry, cut the felt to fit inside the lid to make "carpeting" for the "house."

Blanket

Materials:

*Fabric square

*Needle and thread

Directions:

*Cut out a fabric square the size you would like Polly's blanket to be.

*Sew a blanket stitch around the edges of the fabric square to complete the blanket.

Owl Pillow

Materials:

*Felt in color of choice for owl body

*Orange felt

*White felt

*Black felt

*Needle and thread

*Stuffing

*Miniaturized owl template (can be found here)

*Scissors

*Permanent marker

Directions:

*Print out a miniature version of the owl template given in my Felt Owl Pal post.

*Trace two large circles onto the white felt for eyes, two small circles onto black felt for pupils, a triangle onto orange felt for a beak, and two of the body template onto the desired colored felt for the owls body.  Ignoring the wings and belly pieces, which I did not include because the details were too fine for the scale I was working on, follow the directions for sewing a felt owl pal.

Books

Materials:

*Images to use for book covers

*Plain paper

*Scissors

*All purpose adhesive

Directions:

*Using Paint or a similar program, design textbook covers and print out.  Print one copy of the front cover and two copies of the back cover.

*Cut out 20 or so sheets of plain paper to the same size as the covers.  Add front cover and one back cover to the book.

*Cut the remaining back cover so that it is slightly wider than the thickness of the stack of papers making up the book.  Add adhesive to the back of the strip and then place to form the spine of the book.  The strip of paper should overlap the front and back covers slightly.

Notes/papers

Materials:

*Computer and printer

*Plain paper

Directions:

*Take screenshots of papers you have written (I used pages from my Master's Thesis), shrink to small sizes, and print.

Super Easy Christmas Tinsel Earrings and Glitter Ball Earrings

     Need some pretty earrings for the holiday season?  Try making some ornament earrings.  The tinsel ones take only a minute to make.  The glitter earrings are slightly more time intensive, but the finished product is simply stunning.

Tinsel Ball Earrings

Materials:

*2 tinsel ball mini ornaments

*2 ear wires

*Round nosed pliers

*Flat nosed pliers

Directions:

*Open the loop of the ear wires using the round nosed pliers.

*Slide on the ornament.

*Close the loop using the flat nosed pliers and you're done!

Glitter Ball Earrings

Materials:

*2 tinsel ball mini ornaments

*2 ear wires

*Round nosed pliers

*Flat nosed pliers

*Glitter-It adhesive

*Ultra fine glitter

Directions:

*Remove the ornament tops.

*Pull the tinsel out using pliers.

*Rinse out any residue from the tinsel and then set aside the ornaments to dry.

*Make glitter ornaments using the directions here.  Note that the Glitter-It does not drain out of these little ornaments as well as it does out of the big ones, so try not to add too much.

*Open the loop of the ear wires using the round nosed pliers.
*Slide on the ornament.
*Close the loop using the flat nosed pliers.

If you haven't tried making full size glitter ornaments yet, give them a try.  They're super easy and ridiculously pretty.  I brought this craft to a meeting yesterday and these are the ornaments that we all came up with:

Recycled Wrapping Paper Christmas/Winter Garland

     Have some leftover wrapping paper scraps from last year kicking around?  Make yourself a fun, seasonal garland.  If you don't have some already, you can wait until after you've opened your presents and either get a head start on next year's holiday crafting or use winter themed paper instead of Christmas specific paper.

Materials:
*Patterned or character wrapping paper
*Large and small circle templates (I traced around a large and small drinking glass)
*Cereal box or similar cardboard
*Holographic self-adhesive laminate (or holographic wrapping paper)
*Scissors
*Ribbon
*Glue
*Pen
*Circular hole punch

Directions:
*Trace the small circle onto the patterned or character wrapping paper such that you end up with 12 circles and then cut out the circles.
*Trace the medium circle template onto the cereal boxes, making 12 circles in total, and cut out the circles.
*Trace the medium circle template onto the holographic laminate or paper to make 12 circles and cut them out.
*Adhere holographic paper to one side of each of the cardboard circles.
*Glue a piece of patterned wrapping paper to the center of each of the cardboard circles over the holographic paper.
*Punch a hole in the top of each circle.
*Align the circles, spacing them out as far apart as you would like them to be for the garland.
*Cut a length of ribbon several inches longer than the span of the aligned circles.
*Slide one end of the ribbon an inch or so through the hole in the last circle in the line and tie it in place.
*Slide on the second to last circle, spacing it the desired distance from the last one, and tie in place.  Repeat with the remaining circles.

Felt Heart Name Ornaments

Material:
*Felt
*Chalk or marker
*Fabric paint
*Heart template
*Needle and thread
*Stuffing
*Scissors
*Ribbon
*Fabric scraps and other embellishments (optional)

Directions:
*Using the chalk or marker, trace the heart template onto the felt twice and cut out the two hearts.
*Write the name in the center of one of the hearts using fabric paint and then decorate the ornament however you would like using fabric paint, scrap fabric, or other embellishments.  Set aside to dry.
*Cut off about 2 1/2" of ribbon and fold in half to create a loop.  Sew to the undecorated heart.
*Using a blanket stitch, sew together the hearts, leaving an opening large enough for you to add the stuffing.  Insert stuffing into your heart until it reaches the desired fullness, then sew closed.

P.s. wondering why I have Christmas ornaments with bats on them?  I was trying to come up with a way to symbolically represent myself in the ornament and Brian suggested I make a "crest" with different animals to represent different facets of myself.  He suggested an owl (because I'm smart), a bat (because I love writing, reading, and watching horror), and a cat (because I'm curious, but mostly because I adore cats).  He drew up an on ornament with these animals (see the bottom right ornament).  I then decided to try to replicate his idea, but with fabric scraps.  The only cat fabric I had featured Halloween cats, but I love Halloween, so it just added to the significance of the ornament.  If you're trying to make an ornament that's meaningful, perhaps you could ask the intended recipient (whether it's you or someone else) to brainstorm a crest.  This could be especially nice if you're making ornaments for a child, since they would probably love to see their artistic insights turned into an ornament.

Scrap Wrapping Paper Memory Game

     Here's a great way to recycle some cereal boxes as well as wrapping paper.  Note that these instructions will make 48 memory tiles, but you can easily modify them to make more or fewer.  With this version of the game, you have to match up both the pattern and the color, and game play works the same as with any other memory game.  (If you aren't familiar with the game, you can find instructions here.)  Also, I'd like to give a shout out to Brian for his assistance with this project.  It is a rather time consuming endeavor and I'm grateful that I had another set of hands to help me with tracing, gluing, and cutting out circles.

Materials:
*Six different patterns of wrapping paper or distinct characters on wrapping paper
*Solid colored or holographic wrapping paper
*4 cereal boxes
*8 sheets of paper, each sheet a different color
*Small (about 2.5" in diameter) and medium (about 3" in diameter) circle templates
*Pen
*Scissors
*All purpose adhesive

Directions:
*Trace the small circle onto the patterned or character wrapping paper such that you end up with 48 circles, 8 of each pattern or character, then cut out the circles.
*Trace the medium circle template onto the cardstock, making 6 circles of each color, and cut out the circles.
*Trace the medium circle template onto the cereal boxes, making 48 circles in total, and cut out the circles.
*Trace the medium circle template onto the solid colored (or holographic) paper to make 48 circles and cut them out.
*Glue a piece of solid colored (or holographic) wrapping paper to one side of each cardboard circle and a piece of cardstock to the other side of the circle until you have covered both faces of each circle.
*Glue on your patterned or character paper such that you end up with two or zero tiles of a particular pattern matched up with a given color.  Here's what all of my tiles looked like when I finished:

Wrapping Paper Ornament Bookmarks

     These pretty recycled wrapping paper bookmarks can double as ornaments.  You may want to make some to give as gifts for next year's holiday season.

Materials:
*Wrapping paper
*Large and small circle templates (I traced around a large and small drinking glass)
*Cereal box or similar cardboard
*Gold paper
*Patterned paper (optional)
*Mounting tape
*Scissors
*Ribbon
*All purpose adhesive
*Pen

Directions:
*Trace and cut out a small circle of wrapping paper in the pattern of your choice.
*Cut out a large circle either from a corresponding wrapping paper or sheet of patterned paper.
*Center the small circle on top of the large circle and adhere together using mounting tape.
*Cut a large circle from the cardboard and adhere to the back of the large circle you cut from wrapping paper or patterned paper.
*Cut out a piece of the gold paper shaped like the top of an ornament and adhere to the top of the bookmark.
*Snip off a length of ribbon about twice as long as you would like the ribbon bookmark to be and knot together the ends.
*Glue the end of the ribbon without the knot to the back of the bookmark.

Felt Owl Ornament

Making a felt owl ornament requires the same procedure as the felt owl pal.  The only difference is the ornament requires a piece of ribbon so that you can hang it from your tree.

Materials:
*Sheet of felt in the color of your choice for the owl's body
*Felt and/or fabric in colors of your choice for the owl's wings, belly, beak, and eyes
*Embroidery floss
*Needle
*All purpose adhesive
*Stuffing
*Chalk
*Scissors
*Ribbon

Directions:
*Print out an owl template approximately the size you would like your owl ornament to be.  Here's the one I made for my owl:

*Cut out the pieces of the template.  Using chalk, trace the pieces onto the chosen felts and fabrics.  You will need two copies of the owl's body, two large circles for the owl's eyes, and two small circles for the owl's pupils.
*Using a running stitch, sew on the owl's belly, then sew on the owl's wings.
*Cut off about 2 1/2" of ribbon and fold in half to create a loop.  Sew to the back piece of the owl's body.
*Using a blanket stitch, sew together the owl's body, leaving an opening large enough for you to add the stuffing.  Insert stuffing into your owl until it reaches the desired fullness, then sew closed.
*Glue on the owl's eyes and beak.

Perler Fuse Bead Ornaments: Another Technique

Materials:
*Fuse bead kit (e.g. Perler bead kit)
*Metal cookie cutters
*Cooking spray
*Cookie sheet
*Parchment paper
*Scissors
*All purpose adhesive
*Metallic thread

Directions:
*Preheat the oven to 425 degrees F.
*Line the cookie sheet with parchment paper.
*Place the desired cookie cutters onto the parchment paper.
*Coat the cookie cutters and paper thoroughly with oil.  Since melted fuse beads can be very difficult to remove, I recommend using cookie cutters that you would not mind ruining for this project.
*Pour some fuse beads into the cookie cutters, making sure to fill in as much space as you can.  You may even consider adding a second layer of beads to make sure that you do not end up with any gaps in your finished project.
*Pop the cookie sheet into the oven and heat for 5-10 minutes, depending on how melted you want your ornaments to be.
*Once the ornaments are melted to your liking, remove them from the oven.  Carefully peel them off the parchment paper and drop them into a bowl of warm water.
*Let the ornaments sit until the metal and plastic are cool enough to handle, then remove from the water and dry off.
*Remove the ornaments from the cookie cutters.
*Trim off any excess or awkward looking plastic with scissors.
*Glue metallic thread to the back of the plastic to turn your creations into ornaments.

Bonus Idea: Miniature Model Ornament

     If you have someone in your family who enjoys making models, here is a great way to get this individual involved in the holiday decorating.  

Materials:

*Miniature model kit

*Thread

*Scissors

Directions:

*Assemble the model following the instructions given in the package.

*Tie a piece of string around the model to hang it from your tree.

Glitter Ornaments Take 2

    Last year when I made glitter ornaments, I had some difficulty getting the glue to dry.  When I went to A. C. Moore after Christmas, I noticed that the store had some glitter ornaments on display and I asked an employee how they made their ornaments.  The employee explained that there was a special type of adhesive that you needed to use to make them.  Unfortunately they had sold out of it, so I did not get a chance to experiment with it last year.
     When November rolled around and I started thinking ahead to Christmas crafts, I recalled the glitter ornaments and decided that I wanted to try making them again.  My aunt suggested that I bring some ornament making supplies down for Thanksgiving so we could all make ornaments together and I immediately thought that the glitter ornaments would be perfect for that.  I had yet to try the new adhesive, but when we started making the ornaments it turned out that it was really easy to use and we all had a blast.

Here we are, working on our ornaments

And here are the lovely glitter ornaments we made.  Notice how my sister's ornament is half pink and half silver.  If you're feeling adventurous, try making a two tone ornament.

     These ornaments are so pretty and easy to make that I made some more for my own tree a couple of days later.  When my friend and fellow math grad Sophie stopped by my house over the weekend and the subject of Christmas ornaments came up, I suggested we make some.  The ornaments came out wonderfully.

Here are the ornaments we made

     If you're looking for something fun to do with your family or friends this holiday season, try making some of these ornaments.  They are easy enough so that even those people who consider themselves inept at crafting can make them.  Or, if your loved ones aren't interested in crafting, you could give them out as gifts.

Materials:
*Plastic or glass ball ornaments
*Ultra fine glitter
*Glitter It adhesive

Directions:
*Layer your work space with newspaper.
*Uncap your ornament and pour in some Glitter It.  Swirl the adhesive around until it has coated the entirety of the inside of the ornament.
*Pour excess adhesive back into the bottle.  Let the adhesive drain out for about 15 seconds.
*Open a container of glitter and pour into the ornament.  Swirl the glitter around inside the ornament until it has coated the entire ornament, adding more glitter as necessary.
*Pour any excess glitter back into the container.
*Set the ornament aside to dry.  The package for the adhesive did not say anything about how long it would take to dry, but letting the ornaments sit for about 15 minutes before putting their tops back on seemed sufficient.

     Looking for more Christmas crafts, such as ornaments or advent calendars?  Check out the Christmas section of my blog.

Perler Fuse Bead Ornaments

Materials:
*Fuse bead kit (e.g. Perler beads kit)
*Scissors
*Iron
*Gold or silver thread

Directions:
*Select the appropriate peg board for the ornament you would like to make.  Both the owl and the penguin require a large square pegboard, the candy cane uses the small heart pegboard, the shoe needs only a small square pegboard, and the ornament takes a small circle pegboard.
*Arrange beads on the peg board in the desired pattern.  I forgot to take pictures of the arrangement of the beads for the owl ornament, but here are the other ones:

*Cover your beaded project with a sheet of waxed paper and iron the first side, then remove from the peg board, flip over, put waxed paper on top and iron the second side.  You can find more detailed directions here.

Wondering why I made a shoe ornament?  I am rather fond of shoes and so for the past couple of years I have received shoe ornaments for Christmas.  I decided to make the shoe ornament a tree tradition and plan to add a new one each year, starting with this fuse bead shoe.  Does your family collect a specific type of ornaments for your tree?  Try making one out of fuse beads.  You can find fuse bead patterns online for almost anything, or you could always design your own .

Also, if you're looking for more fuse bead ornament patterns for your tree, check out my snowflake designs in this post.