Perler Fuse Bead Drink Covers

     Warmer weather is here (unless you live in Maine like I do, in which case it could still transition back to winter at any moment), which for many of us means we'll be eating some meals outdoors.  Tired of finding drowned insects in a beverage you've had outside?  Try making one of these drink covers.

Materials:
*Fuse bead kit (e.g. Perler beads kit)
*Iron

Directions:
*Arrange beads on either a circular or hexagonal pegboard, using the patterns shown above for guidance.  There are two different styles of drink cover, one to allow for a hole through which to put a straw and one that you would have to remove to take a sip of your drink.  Either pattern can easily be altered to become the other by adding or removing a few beads.
*Cover your pattern with a sheet of waxed paper and iron the first side, then remove from the peg board, flip over, put waxed paper on top and iron the second side.  You can find more detailed directions here.
*Perhaps it's because I tend to use a hotter setting on my iron, but I've noticed that my fuse bead creations have a tendency to curl slightly.  To prevent this, while the drink cover is still hot, press it underneath a heavy book for several minutes.
*Note: These designs will only work on small drinking glasses.  You can make larger versions by using large fuse bead pegboards and adding additional beads.

Glittery Clay Shoe Earrings

Materials:
*Clay
*Small metal shoe shaped cutter
*Glitter glue
*2 ear wires
*Needle
*Chain (optional)

Directions:
*Roll clay out until it is about 1/4" in thickness.
*Punch out two shoe shapes.  Using the needle, poke a small hole in each shoe, which is where the jump ring will go through.
*Bake the clay in the oven according to the directions on the package.  Once cooked, remove from the oven and set aside to cool.
*Once the clay is cool, add a thin layer of glitter glue to give the shoes some sparkle.
*Once dry, either attach the shoes to some length of chain and attach the chain to the ear wires, if desired, or fasten directly to the ear wires.

Pom Pom Chick

     Here's a quick, easy, and inexpensive Easter craft.  I found this idea here.  I'm including below my own, slightly modified version of the instructions below.
Materials:
*Large yellow pom pom
*Medium yellow pom pom
*Black felt
*Orange felt
*Scissors
*All purpose adhesive

Directions:
*Glue together the large and medium pom poms.  The large pom pom forms the chick's body and the medium one serves as its head.
*Cut off a tiny piece of black felt.  Roll it between your fingers until it forms a ball and then glue it onto the medium pom pom to make one of the chick's eye.  Make the second eye in the same fashion.
*Cut out a diamond shaped piece of felt and fold it in half.  Press it between your fingers for several minutes, until it retains its crease down the middle.
*Glue the crease of the orange felt to the medium yellow pom pom to make the chick's beak.

Glittery Easter Egg Garland

Materials:
*12 plastic Easter eggs
*Glitter
*Mod Podge
*Fuzzy yarn
*Paintbrush

Directions
*Mix some glitter into Mod Podge.
*Using the paintbrush, coat the eggs in the glitter glue mixture.  Set aside to dry.
*Once the eggs are dry, string onto the yarn.  I found that I had an easier time getting the yarn through the eggs when I put a little glue on the ends of the yarn and let it dry.

Spring Pinwheel Earrings

     Spring is here, although if you live in Maine like I do, you wouldn't be able to tell.  Welcome the change of season with some fun paper pinwheel earrings.

Materials:
*Patterned paper
*2 mini buttons
*2 jump ring
*Ear wire
*Head pin
*All purpose adhesive
*Scissors
*Round nosed pliers
*Flat nosed pliers
*Small beads

Directions:
*It's somewhat difficult to verbally describe the steps needed to make these earrings, so I've included a picture below showing the necessary folding steps in addition to written directions.
*Cut out a small square from patterned paper (approximately 1.5" x 1.5").
*Fold the paper in half diagonally with the pattern side facing in.  Crease and unfold, then repeat the procedure with the other diagonal.  You should end up with something like the top right picture below.
*Cut along one of the diagonal folds 1/4 of the way in and then fold over as shown in the bottom left picture.
*Repeat with the remaining sides to get the bottom right picture.

*Repeat the entire procedure for a second square of paper to form a second pinwheel.
*Glue a small button in the center of each pinwheel.
*Poke a small hole in each of the pinwheels using a needle or similar implement.
*Pry open the jump rings with the pliers and slip each one through the hole in its respective pinwheel, then close the jump rings.
*Cut the "head" off two head pins, then curl the ends and clamp to the jump ring.
*Slide small beads onto the head pins, then create a loop at the top of each head pin and attach each one to its respective ear wire.

Adorable Owl Heat Pack

Materials:
*Fabric with predominant color brown (make sure it's not highly flammable)
*Brown felt
*White felt
*Orange felt
*Black felt
*Felt in four bright colors (e.g. green, blue, purple, and pink)
*Chalk
*White rice
*Needle and white thread
*Sewing machine

Directions:
*Resize my template, included below, to the desired size, and print.  You may also want to print a copy of what the owl should look like assembled, which is also included below.

*Cut out all of the pieces of the template and then start tracing onto the corresponding fabric or felt using chalk.  You will need 2 copies of the owl's body from the fabric, 4 wings in brown felt, two large circles cut from the white felt for eyes, two small black circles for pupils, one orange triangle for a beak, and four hearts of each of the four bright colors for feathers.
*Stitch together two pairs of wings and repeat for the other two copies.  By sewing together 2 instead of using just one, this gives the wings some stability.
*Sew the eyes, beak, and feathers to one copy  of the owl's body.  When sewing the feathers, start with the bottom row of feathers and work your way upward.
*Place the copy of the owl's body with the face facing up.
*Place the wings on top with the side with the nice stitches facing down.  Position them such that they are at the height that you want the wings to be at and such that a tiny bit of the flat edge of the wing is sticking out over the owl's body on either side.
*Place the other copy of the owl's body pattern side down on top and begin sewing together, leaving an opening to pour in the rice.
*Add rice until your owl reaches its desired fullness.
*Sew closed and your heat pack is ready to use.  Just pop it into the microwave for a few seconds.

Easy Earrings

     This week's craft takes virtually no time to create and can save you a fair amount of money when compared to buying earrings from the store.

Materials:
*Earring posts
*Small, flat backed objects to turn into earrings
*E9000 glue or a strong all purpose adhesive

Directions:
*Glue small objects to the earring posts and then set aside to dry for 24 hours.  Once they're dry, they are ready to wear :)