DIY Pet Stocking

     Include your favorite four footed family member in your holiday celebrations with this adorable mini stocking.  (Looking to make a full sized stocking?  See this post.)  This tutorial also works for a stocking ornament.  For the record, Beans is not actually my cat; he belongs to my brother and his girlfriend, but as Beans's "aunt," it is my duty to spoil him.  Don't tell him, but he's getting a l-a-s-e-r p-o-i-n-t-e-r for Christmas :).

Materials:
*Red felt
*White felt
*Needle and thread
*Fabric paint or glitter glue
*All purpose adhesive
*Metallic marker or chalk

Instructions:
*Draw a stocking shape or find a free printable stocking template online and size to your desired size, then print.
*Trace two copies of the stocking shape onto the red felt and cut out.
*Trace only the upper part of the stocking onto white felt to create the name band for the stocking.  Cut out.

*Glue the white parts of the stocking to the top of the red parts.  Let dry.

*Fold the two stocking shapes together such that the white part faces in and stitch together, leaving the top edge unsewn.

*Turn the stocking right side in, starting from the toe and working your way up.

*Write your pet's name on the white band of the stocking using fabric paint or glitter glue.  Let dry.

*If you'd like to hang the stocking from the mantle or tree, thread the needle and slide it through the upper corner at the top of the stocking.  Tie the ends together to create a loop.  Cut off the needle part and excess thread and then turn the thread until the knot hits the inside of the stocking, hidden from sight.  Now the little stocking is finished!

For size comparison, here is Beans's stocking next to mine.  As you can see, it's rather tiny, just big enough to fit a l-a-s-e-r p-o-i-n-t-e-r.

Magic of Christmas Potion Ornament

     Every holiday needs a little magic.  This ornament is a great gift for magic lovers of all ages.  Customize with your preferred glitter color(s) and your favorite holiday spangles/confetti.  You could also make "Magic of Christmas" potion pendants using this tutorial.

Materials:
*Corked vial
*Glitter/spangles/confetti of your choosing
*All purpose adhesive
*Twine
*Printer paper
*Coffee
*Baking pan
*Black gel pen
*Scissors

Directions:
*Uncork the vial and pour in a layer of glitter in a color of your choosing.
*Add a layer of spangles.
*Either cork the vial or cover the opening with your finger and shake until the glitter and spangles have mixed together.
*Add a layer of glitter followed by a layer of spangles and then shake until mixed.
*Repeat the process until your vial is sufficiently full.
*Cork the vial.  You may want to use a dab of all purpose adhesive to secure the cork in place so it won't fall out.
*Wrap some twine around the neck of the neck of the vial and knot.
*Pull the twine 1/4 of the way back around the neck of the bottle on either side and glue down.  Once your are finished, the vial should hang straight down rather than at an angle as it would if hanging from the knot.
*Tie the ends of the twine together to create a loop.
*To make the label, follow the directions given in this post.
*Glue the label on.  Once everything is dry, your ornament is tree-ready!

Maine is Where the Heart is Felt Ornament

     Show some love for the greatest state this holiday season.  While my template is for Maine, you could easily design a template of your own and follow the same steps to create an ornament for your home state.

Materials:
*Felt in a color of your choice
*Metallic marker
*Heart button
*All purpose adhesive (optional)
*Needle and thread
*Stuffing
*Metallic thread

Directions:
*Print out the Maine template below or find/create a template for your state.  The dot on my template marks the approximate location of the Bangor area, which is where my family is from and thus where I wanted the heart on my ornament to be.

*Trace two copies of the state template onto the felt using metallic marker and cut out.

*I used a little bit of all purpose adhesive to hold my heart button in place before sewing it on.  The drawback to this approach is that I had to sew through the glue, but it wasn't much of a challenge and ensured that I got the heart in the right location.

*Stitch together the two copies of the state using a blanket stitch, leaving a gap for stuffing.

*Stuff and sew closed.

*Slide some metallic thread through the stitching toward the top and tie the ends together to create a loop to use to hang the ornament from the tree.

Pokeball Glitter Ornament

     Show off your love for Pokemon and add some sparkle to your holiday season with these fun Pokeball glitter ornaments.

Materials:
*Red ultra fine glitter
*White ultra fine glitter
*Glitter-It glue
*Plastic or glass ball ornament
*Black duct tape
*White duct tape
*Scissors

Directions:
*Layer your work space with newspaper.
*Uncap your ornament and pour in some Glitter It.  Swirl the adhesive around until it has coated the entirety of the inside of the ornament.
*Pour excess adhesive back into the bottle.  Let the adhesive drain out for about 15 seconds.
*Pour a small amount of white glitter into the ornament, being careful so as to keep it from hitting the sides.  Slowly swirl the glitter around the bottom of the ornament until it all sticks to the bottom of the ornament.
*Add a little more glitter and swirl it around, slowly working your way up until the bottom half of the ornament is covered in white glitter.
*Add in some red glitter and swirl it around the top of the ornament, until the top half of the ornament is covered in red glitter.  Inevitably, some of the red glitter will mix with the white at the bottom and vice versa, but it should only be a minimal amount.
*Cut off a strip of black duct tape slightly longer than the circumference of your ornament and from that cut a strip about 1/2" in width.  Tape this around the equator of your ornament.
*Cut out a circle of black duct tape and tape that over the strip of duct tape running along the equator.
*Cut out a white circle of duct tape which is smaller than the black one and tape that over the black circle.

Glittery Gourds

Materials:
*Foam gourds
*Paint in colors of your choice
*Paintbrush
*Glitter in colors of your choice
*Acrylic sealer or Mod Podge (optional)

Directions:
*Apply a coat of paint to your gourd in the color of your choice.
*While the paint is still wet, throw on some glitter.  Set aside to dry.
*To keep the paint from flaking off and hold the glitter in place, apply a coat of an acrylic sealer or Mod Podge, if desired.

Geometric Leaf Thanksgiving Scrapbooking Layout

Materials:
*Cardstock or scrapbooking paper for leaf
*Photos
*Scrapbooking paper in the color/pattern of your choice for the background
*Embellishments of your choice
*Scissors
*Acid free pen/marker
*All purpose adhesive
*X-acto knife or Silhouette CAMEO

Directions:
*If using the Silhouette CAMEO, download the below template and import it into your library.  You can use the tips outlined in this post if you're not sure how to cut it out with your machine.

*If doing by hand, print out the template and cut it out using scissors and, when necessary, an X-acto knife.  Trace the template onto the cardstock you've chosen for your leaf and then cut out the leaf shape.
*Once you've cut out your leaf shape (by either method), carefully trace the inside pieces of the leaves onto the backs of the photos.  Add a border around each trace line about 1/8" thick.  This way, when you cut out your photos, the leaf shape will overlap the edges of the photos.
*Crop your photos following the border you drew and glue to the leaf.
*Arrange the leaf on the scrapbooking paper you've chosen and then glue down.
*Add embellishments of your choice.
*If you're looking for an inexpensive way to display your page, you could place it inside a page protector and then prop it against some object, such as a weighted down box, which is what I did.

"Turkey Safe Zone" Thanksgiving Sign

     No turkey on your Thanksgiving menu?  Add this cute sign to your decor!

Materials:
*Red, yellow, orange, and brown cardstock
*Googly eyes
*All purpose adhesive
*Pen (or black cardstock)
*Laminating sheets (optional)

Directions:
*Note: I designed the below templates to work with my Silhouette CAMEO.  If you have a CAMEO of your own, you can cut out all of the pieces using that (for more instructions on using my templates with the CAMEO, see this post).  Otherwise, I'd recommend skipping the lettering part of the template and hand lettering using a black pen, although you could still use an X-acto knife to cut out the letters if you felt inclined to do so.

*Size the above templates to the desired size and cut out all of the pieces, with perhaps the exception of the lettering on the sign (if you do cut out the letters, you'll have to trace another copy of the sign shape onto black cardstock and put that in behind the constructed sign).
*Trace the sign shape onto yellow cardstock, the turkey body onto brown cardstock, four feathers onto red cardstock, three feathers onto orange cardstock, and the little triangular beak shape onto orange cardstock (the circular shapes are for making eyes, but if you're using googly eyes, you won't need them).  Cut out all of the pieces.
*Arrange the feathers out on the yellow sign and glue down.
*Add the turkey body and the beak, gluing those down as well.
*Write out "this house is a turkey safe zone" across the sign.  Try lettering it in pencil and then going over it with a black pen.
*For added durability, laminate the sign.
*Glue on some googly eyes and you're done!