How to Design Your Own Pokemon Plushie Template

My Meowth plushie template.  For instructions on how to make a Meowth plushie, see this post.

Materials:
*Image of desired Pokemon
*Painter's tape
*White copy paper
*Pencil

Directions:
*Choose an image of the Pokemon you'd like to make a plushie of in the desired pose.  I chose one of my AR photos of Meowth and cropped it.

*Resize the photo to be approximately the size that you'd like your plushie to be and print.  It's okay if it looks a bit pixelated as long as you can distinguish the outline and the various features of your Pokemon.
*Decide what features you'd like to include in your plushie.  If your monster is rather complicated, you may want to pick specific features to concentrate on while ignoring others.  Think about whether you'd like to include the limbs (assuming it has limbs) as part of the body or separately.  If you'd like to stuff them, it's probably easier to do them separately, but otherwise you could do them together.  What facial features and markings will you use?  Are there ears?  You'll probably want to do those separately from the body.
*Tape the photo to a sunny window (the sunnier out it is, the easier it will be to see the details of your monster) using painter's tape.

*Tape a sheet of white copy paper over your picture, again using painter's tape.

*Trace the "body" piece, which should include the head and torso, plus limbs if you choose to keep them connected.  Trace the facial features you'll be using as well.  (I had to darken the photo a lot to make the pencil lines visible.)

*Move the paper and trace each of the remaining body parts separate from the body.  (You could trace it all as one piece, with e.g. the ears extending partway into the head, but that necessitates printing an extra copy or so of the template when you're done.)

*Now your template is done.  See my previous Pokemon plushie tutorials to get an idea of what supplies you'll need for your plushie (felt, stuffing, needle and thread, etc.) and how to construct it.  Also, feel free to contact me (in the comments below or at hathaway.amber@gmail,com) if you have further questions.

Felt Pokemon Meowth Plushie

     Meowth has long been my favorite Pokemon because it's catlike.  When I started making these plushies, I thought Meowth would be too complicated to make, but after making two other plushies that turned out all right, I decided to give Meowth a try.  This one took a lot more time and effort than the earlier two, but on the whole I'm pleased with my Meowth.

Materials:
*2 sheets cream colored felt
*1 sheet light brown felt
*Pink felt
*Maroon felt
*White felt
*Black felt
*Needle and thread
*Scissors
*All purpose adhesive
*Stuffing
*Gold fabric
*A metallic marker or chalk

Directions:
*Print out a copy or three (three needed if you want to reuse the template) of the below template, sized to your desired size:

*Cut out the template pieces and trace onto the sheets of felt using a metallic marker or chalk.  From the cream colored felt, you'll want two copies of the body template, four copies of the arms, four copies of the legs, two of the tail, and also one of the coin shape.  From the light brown you'll need two copies of the feet, one of the upper tail part, and two copies of the inner ears.  From the white you'll want two eyes and two teeth.  I waited to cut out the teeth until I was assembling the mouth because they're small and easy to lose, so that's why they're not pictured below,  From black you'll want two copies of the outer ears and two pupils.  Trace the mouth on the maroon felt and the tongue on the pink felt.
*Cut out the various pieces, as shown below:

*Glue the inner ears to the outer ears, the light brown foot part to the feet/legs, the light brown tail part to one of the cream colored tail parts, the pupils to the eyes, and the tongue and teeth to the mouth, as shown below:

*Place the remaining cream colored tail piece against the back of the tail piece you just glued together and stitch together.

*Place one of the remaining cream colored foot/leg pieces against the back of the one of the foot/leg pieces you just glued together and stitch together, leaving an opening for stuffing.

*Stuff and sew closed.  Repeat the process with the other foot/leg pieces.

*Place two of the arm pieces together and stitch together, leaving an opening for stuffing,

*Stuff and sew closed.  Repeat the process with the other arm pieces.

*Place together the body pieces and start sewing together, sandwiching in the ears, tail, arms, and legs when appropriate.  Note that I did not sew together Meowth's antennae/whiskers, although you could if you prefer the stitched aesthetic to glue.  Leave an opening for stuffing.

*Stuff and sew closed.

*Glue together the corresponding whiskers/antennae and then glue on Meowth's face, making sure to set the eyes far enough apart that the coin will fit.

*Glue some gold fabric to the oviod "coin" shape.

*Cut out some strips of black felt and glue to the coin.

*Glue the coin to Meowth and now you're done!

Felt Pokemon Snorlax Plushie

     Still trying to catch a Snorlax?  Why not make one?  This little critter may not be much help defending your local Gym (or maybe it will; you never know), but it's cut and cuddly, the perfect gift for Pokemon fans of all ages.

My Snorlax defending local Gym, Emera Astronomy Center

Materials:
*2 sheets medium blue "Snorlax colored" felt
*1 sheet cream colored felt
*Scraps of black felt
*Scraps of white felt
*Needle and thread
*All purpose adhesive
*Stuffing
*Metallic marker or chalk

Directions:
*Print out a copy or two (two needed if you want to reuse the template) of the below template, sized to your desired size:

*Cut out the various outside pieces of the template and trace using a metallic marker or chalk two copies of the body from blue felt, one copy of the inner body piece from cream colored felt, and four copies of the foot from cream colored felt.
*Cut out the various pieces, as shown below:

*Sew the cream colored body piece onto one of the blue body pieces like such:

*Sew together two of the foot pieces, leaving a small opening.

*Stuff and then sew the rest of the way closed.  Repeat with the other two foot pieces.

*Place together the two body pieces and start sewing together, sandwiching in the feet when needed.  Leave an opening for the stuffing.  I left a fairly sizable one at the outset so that I could reach and more easily stuff the distant arm.

*Stuff and sew closed.  Since I started with such a big opening, I added a little stuffing, then added a few stitches, added some more stuffing, sewed a few more stitches, and so on.

*Cut out eyes and a mouth from black felt and two teeth from white felt and glue them to the Snorlax's face.  Now your Snorlax is ready!

Felt Pokemon Zubat Plushie

     For the past week and a half or so, I've been playing Pokemon GO and I love it.  It's a lot like a scavenger hunt, which is great, and the AR feature is amazing.  I've been having way too much fun taking pictures of myself with my favorite monsters (e.g below photo).  Anyway, if you're looking to bring Pokemon into the physical world for yourself or your favorite Pokemon trainer, why not try making one from felt?  It's much less expensive than buying the plush toys from a store.  I think Zubats are adorable and they are fairly simple in terms of their features, so I thought I'd try my hand at making one.  Here's how you can too.

Me giving a Zubat bunny ears

Materials:
*1-2 sheets blue felt, depending on how large you'd like your Zubat to be
*1-2 sheets blue felt, depending on how large you'd like your Zubat to be
*1 sheet black felt
*White fabric paint or 1 sheet white felt (for Zubat's teeth)
*All purpose adhesive
*Needle and thread
*Scissors
*Metallic marker or chalk
*Stuffing

Directions:
*Print out a copy or two (two needed if you want to reuse the template) of the below template, sized to your desired size:

*Cut out the various outside pieces of the template and trace using a metallic marker or chalk two copies of the body from blue felt (I made one sans legs for ease, but you may want to keep legs on both for added structural integrity), two copies of the outer ear piece from blue felt, and four copies of the wings from purple felt.  Then cut out, either from the same template or a duplicate copy, the inner ear and mouth pieces and trace two copies of the inner ear onto purple felt and one copy of the mouth onto black felt.
*Cut out all of the various felt pieces, as shown below:

*Using either fabric paint or felt, create teeth for the mouth.  You'll see in the picture below that I used fabric paint, but in the end I wasn't satisfied with them, so I covered them up with felt.

*Glue or sew together the outer and inner pieces, as shown below:

*Fold two copies of the wings together and stitch them together.  This will make the wings more sturdy.  I used a running stitch here, but blanket stitch could work nicely.  Repeat with the other two wing pieces.

*Place together the two body pieces and start sewing together, sandwiching in the wings and ears as needed.  Leave an opening at the bottom for stuffing.  I used a running stitch again here.

*Add stuffing and sew closed.

*Glue on your Zubat's mouth.  Now you're done!

Prop Roque/Croquet Mallet

     Need a prop roque/croquet mallet?  The head on this design is a little small, but if you're looking for an inexpensive prop for a play or costume that doesn't have to be true to life, this may be what you need.

Materials:
*Paper tube (e.g. toilet paper, paper towel)
*Dowel
*Wood grain duct tape
*Black duct tape
*X-acto knife
*Scissors

Directions:
*Use an X-acto knife to cut "+" shape into the center of the paper tube.  The "+" shape should be about as long and wide as the dowel's diameter.
*Gently push the dowel into the "+" shape.  Once you're done, the two pieces should fit together snugly, like in the photo below:

*Remove the dowel from the tube and cover the ends of the tube with wood grain duct tape.
*Wrap wood grain duct tape around the remainder of the tube.
*Find where the hole for the dowel is and cut the same "+" shape in the tape and then push down with the dowel, like before.

*Remove the dowel and wrap that in wood grain duct tape.
*Reinsert the dowel in the hole.  I found that it stayed on fine without any adhesive, but you can always glue it down if you want to make it a little sturdier.
*Decorate the ends of the tube and part of the dowel with some black duct tape for a finishing touch.

Mini Mask Cake Toppers

     For my birthday cake, I wanted it to represent both the masquerade and The Shining themes.  I added the notorious phrase "redrum" in red lettering, sprinkles for confetti, and topped it off with some mini masks I made.  Brian did the icing.  It's not perfect, but then again we're mathematicians, not cake decorators and on the whole I'm pleased with the way it came out.  If you're hosting a masquerade of your own, these mini masks make for excellent cake or cupcake toppers.

Materials:
*Cardstock in a variety of colors
*Scissors
*X-acto knife
*Pencil
*Toothpicks
*All purpose adhesive
*Rhinestones, stickers, and other embellishments

Directions:
*Shrink mask template to the desired size and cut out.
*Trace the mask template onto the cardstock and cut out.
*Glue the mini mask to a toothpick and let dry.
*Add embellishments.  I used the eye hole cut outs for feathers, plus some rhinestones, beads, and stickers.  Now they're ready for your next cake decorating endeavor.

Oreo Strawberry Shortcake Bites

     Looking for a fast and easy snack for your upcoming Fourth of July celebration?  Why not try a twist on strawberry shortcake, using vanilla Oreo Thins as the "cake" for a bite sized alternative?  Check out the video below to find out how I make them.  If the embedded video doesn't work for you, you can see the video on my YouTube channel at https://www.youtube.com/watch?v=dYz1934Qcfk.