Felt Pirate Eye Patches

     These felt eye patches are great for a pirate themed party.  You can either make them to give out as party favors, or you can let partygoers make their own patches by tying the elastic to the felt patches.

Materials:
*Black felt
*Hole punch
*Black elastic
*Scissors

Directions:
*Cut out eye patches from black felt.
*Punch out a hole in either side of the eye patch.  The hole punch I was using was rather dull and so it only punched out the circle halfway, but I actually liked it better that way because the holes weren't as visible.
*Tie elastic to the holes, making sure it is neither too tight nor too loose to fit properly on peoples' heads.  This step can also be left to the partygoers themselves.

Pirate Themed Perler Fuse Bead Coasters

     I found some of these patterns on these sites and also in one of the Perler Mega Ideas books, while others I came up with on my own.

Materials:
*Fuse bead kit (e.g. Perler beads kit)
*Iron
*Black felt
*Black embroidery floss
*Scissors
*All purpose adhesive

Directions:
*Arrange beads on a small square peg board, following the patterns shown above for guidance.
*Cover your pattern with a sheet of waxed paper and iron the first side, then remove from the peg board, flip over, put waxed paper on top and iron the second side.  You can find more detailed directions here.
*For the octopus coaster, glue a scrap of black felt to a piece of black embroidery floss to create an eye patch.
*Thread the embroidery floss through the holes in the coaster and tie in the back to fasten it to the octopus's head.
*Glue the eye patch in place.

Personalized Pirate Paper Cups

Materials:
*Paper cups
*Scissors
*White printer paper
*Cardstock
*Computer and printer
*Pencil
*Tape

Directions:
*Disassemble a paper cup.  It should separate into two pieces, a curved, rainbow-like shape and a circle.  Discard the circle.
*Snip off the rim of the cup and the folded over part at the bottom that had been used to hold the circle in place.
*Trace the shape of the cup onto a sheet of white printer paper and cut it out.  This will be your template.
*Create your personalized cup design.  Here's the design I used:

*Print out your design.  Position the template so that your image is in the center of the template.  Trace around the template and cut out.
*Tape your design to a paper cup.
*Repeat for the remainder of the cups.

Pirate Shirt and Bow

Pirate Shirt

Materials:

*T-shirt

*Pirate fabric

*Fusible interfacing for T-shirts

*Iron

*Scissors

Directions:

*Cut out a patch of fabric slightly larger than the size you would like your design to be.

*Cut out a comparably sized piece of fusible backing.

*Follow the directions that come with your fusible interfacing.  I don't know a lot about fusible interfacing, but I think the ones designed for T-shirts mostly have instructions along these lines: peel off paper backing on one side of the interfacing and press that side to the fabric.  Iron to the fabric.  Trim off any excess fabric.  Peel off the remaining paper backing.  Position the fabric on the desired spot on the shirt.  Cover with a damp press cloth and then iron down.  Remove the press cloth and iron the shirt dry.

Pirate Bow

Materials:
*Ribbon

*Pirate fabric

*Heavyweight white fabric

*Fusible interfacing

*Iron

*T-shirt

*Barrette

*All purpose adhesive

*Scissors

Directions:

*Cut off a length of ribbon and tie to form a bow.

*Snip out triangles from the ends of the ribbon, if desired.

*Create a pirate decal for the bow using the above directions for the pirate shirt, except fuse the pirate fabric to the white fabric instead.

*Glue the bow to the barrette and the decal to the center of the bow.

Pirate Octopus Cupcake Toppers

     On Sunday I had my pirate themed birthday party, so for the next few weeks I'll be posting pirate themed crafts.  If you're planning a pirate party, you may also want to check out an older post of mine, Growing Alum Crystals and Treasure Chest Display.

Materials:
*Black clay
*Green clay (or other color you would like to use to make the octopus's body)
*Black permanent marker
*Baking sheet

Directions:
*Mold green clay into the shape of an octopus.
*Use black clay to make the eye and the patch for the eye patch.
*Bake clay according to the directions on the package.
*Remove from oven and set aside to cool.  Once it's cool, draw on the string part of the eye patch using a permanent marker.

Another Graduation Photo Frame and Tassel Holder

     On Saturday I graduated with a Master's of Arts in mathematics, which meant it was time for me to make another graduation photo frame and tassel holder (you can see my photo frame and tassel holder for my undergraduate graduation here).

Materials:
*Photos
*12" x 12" sheet of plywood
*12" x 12" piece of patterned scrapbooking paper
*Scissors
*Decorative edge scissors
*12" x 12" sheet white cardstock or two 8 1/2" x 11" sheets of white cardstock
*Scraps of brown, black, orange, and white paper (to make the owl)
*Scraps of paper in three corresponding colors (for the owl's feathers)
*Small heart shaped punch (optional)
*All purpose adhesive
*Mounting tape
*Rhinestone
*Hammer
*Small nail
*X-acto knife
*Ruler
*Pencil
*Black thread

Directions:
*Glue sheet of patterned cardstock to the plywood.
*Using an enlarged version of the graduation hat in the graduation owl template (given below), cut out a graduation cap from black paper.  Glue it to the patterned cardstock as in the above picture.

*Hammer a small nail through the center of the graduation cap, leaving a small gap between the head of the nail and the plywood so that the tassel can be hung up on it.  If the nail pokes through the back of the plywood, you can either trim the nail down using wire cutters or cover the pointy end of the nail with a dab of glue so that it won't poke into anything.
*Glue a small rhinestone over the head of the nail.
*Using a ruler, mark out the desired dimensions for the frames for each of the photos.
*Use decorative edge scissors to give the frames a fun shape.
*Carefully cut out the inside of each frame using an X-acto knife.
*Using mounting tape, adhere the pictures to their respective places on the patterned cardstock.
*Glue frames over the pictures.
*To make the graduation owl, print out a small graduation owl template.
*Cut out the body and two copies of the wings from brown paper, two large circles from white paper for the eyes, two small black circles for pupils, and a small orange triangle for the beak.  Cut out or punch out using a heart shaped punch nine hearts, one in each of the three corresponding colors, to make the feathers.
*Glue together the various parts of the owl like this:

*Cut out a short but long rectangle of white paper.  Roll it up and tie it closed with black thread to form the owl's diploma.
*Glue the diploma to the owl's wing and then glue the owl to the patterned cardstock.

Mini Polaroid Refrigerator Magnets

Materials:
*Digital photos and printer
*Magnetic backing
*Scissors

Directions:
*Crop desired pictures to square shapes and shrink them to the desired size.
*Paste squares into a word document, leaving plenty of white space between pictures.
*Print out pictures and crop them to look like Polaroids.
*Adhere magnetic backing to the backs of the pictures.
*Place on your refrigerator or another metallic surface.